1C10:0 |
---|
2C11:0 |
3C12:0 |
4C13:0 |
5C14:0 |
6C15:0 |
7C16:0 |
8C18:0 |
9C18:1 trans 9 |
10C18:1 cis 9 |
11C18:2 cis 9,12 |
12C20:2 cis 11,14 |
1C10:0 |
---|
2C11:0 |
3C12:0 |
4C13:0 |
5C14:0 |
6C15:0 |
7C16:0 |
8C18:0 |
9C18:1 trans 9 |
10C18:1 cis 9 |
11C18:2 cis 9,12 |
12C20:2 cis 11,14 |
Column: |
Part No: |
Phase Name: ZB-FAME |
Sample Notes: Recommended Liner: Zebron PLUS Single Taper with Wool, 4 mm ID
Liner Part No.: AG2-0A11-05 (for Agilent systems)
Inlet Seal: AG0-8620 (Gold Plated Easy Seal)
Septum: AG0-4696 (PhenoRed-400)
Sample Preparation
1. Weigh out 100-200 mg of cheese and place it into a scintillation vial
2. Add 100 mg pyrogallic acid
3. Add 2 mL ethanol followed by 4 mL deionized water and 4 mL NH4OH (concentrated)
4. Incubate @ 70 °C for 20 min then add 10 mL HCl and incubate for an additional 25 min
5. Extract triglycerides using 2 mL diethyl ether and 2 mL chloroform
6. Blow down extraction liquid
7. Reconstitute in 1 mL toluene and 2 mL 8 % boron trifluoride in methanol
8. Cap reaction mixture, hold @ 100 °C for 45 min
9. After reaction, add 5 mL water, 1 mL hexane, and 1 g Na2SO4
10. Extract upper layer for GC analysis |